Undead_Lives
New Member
This is a tutorial on how to make water without using the ugly cliffs that blizzard uses.
First off, you need to switch off the "Enforce Water Height Limits". This means you uncheck the setting.
<img width=\"501\" class=\"attach\" src=\"http://img417.imageshack.us/img417/5299/waterheight6on.jpg\" border='0' alt=\"IPB Image\" />
Next, you need to make some water. It doesn't matter if you used deep or shallow water.
Then, fill it in until you have the normal height. (use raise height one for shallow, two for deep)
Now, the fun part. Use the lower function:
To get this kind of result.
When your finished and have done all of your water, it will look something like this:
And that's it! It's that easy.
First off, you need to switch off the "Enforce Water Height Limits". This means you uncheck the setting.
<img width=\"501\" class=\"attach\" src=\"http://img417.imageshack.us/img417/5299/waterheight6on.jpg\" border='0' alt=\"IPB Image\" />
Next, you need to make some water. It doesn't matter if you used deep or shallow water.
Then, fill it in until you have the normal height. (use raise height one for shallow, two for deep)
Now, the fun part. Use the lower function:
To get this kind of result.
When your finished and have done all of your water, it will look something like this:
And that's it! It's that easy.